Brain Wave Medisystem Private Limited

IOB Warming Unit
Dimensions:H28cm x D22cm x W22cm
Weight: 4.5 kg Relative Noise Level: 55 dBA
Operating Temperature: High: 43º ± 3ºC (109.4º ± 5.4ºF) Med: 38º ± 3ºC (100.4º ± 5.4ºF) Low: 32º ± 3ºC (89.6º ± 5.4ºF)
Device Rating: 110-120 VAC, 60 Hz, 10 A 220-240 VAC, 50 Hz, 8 A
Standards: IEC 60601-1, IEC 60601-1-2, IEC 60601-1-8, IEC 80601-2

Specifications and product parameters Physical Characteristics Dimensions 28cm high X22cm deep X22cm wide Weight 4.5 kg Relative noise level 55 dBA Hose Flexible, compatible with the IOB warming system Filtration system High efficiency 0.2 µm filter Recommended filter change Every 12 months or 500 hours of use Mounting/ Clamped Can be clamped to an IV pole, mounted to the IOB rolling stand accessory or placed on a hard Surface. Temperature Characteristics Recommended operating environment Temperature: 15°C - 30°C Relative Humidity: ≤90% Atmospheric pressure: 80kPa-106kPa Heat generated 750 W (average) operating temperatures Average temperatures at the end of the hose: HIGH: 43°C ± 1. 5°C MED: 38°C ± 1. 5°C LOW: 32°C ± 1 .5°C Safety System Thermostat Independent electronic circuit; thermal cutoff shuts the heater OFF to ensure hose end air remains below 58°C (58°C ± 3°C typical); back-up over-temperature detection at hose inlet Alarm system Over-temperature (≤58°C, 58°C ± 3°C typical): red Over-temp indicator light flashes, alarm sounds, heater and blower shut down, operating indicator lights turn OFF, control panel becomes unresponsive. Fault "System Fault "information will display on the LCD, alarm sounds Over current protection Dual input fused lines 

Electrical Characteristics Heating element 1000 W Resistive Leakage current Meets IEC 60601-1 requirements Blower motor Operating speed: approximately 2,900 rpm Max Airflow: 50cfm or 23 L/s Power consumption PEAK：1500W AVERAGE：750W Power cord 5m, 3 cond , 10 A Device ratings 110-120VAC 50/60Hz 10A 220-240VAC 50/60Hz 7A Fuses 12A (110 - 120 VAC) 8A (220 - 240 VAC) Certifications IEC 60601-1; EN 60601-1-2 Classification Classified under IEC 60601-1 Guidelines (and other national versions of the Guidelines) as Class I, Type BF, Ordinary equipment, Continuous operation Not suitable for use in the presence of flammable anesthetic mixtures with air or with oxygen or nitrous oxide. Device Directive as a Class IIb device Diagnostics A qualified service technician can perform over-temperature detection system testing, temperature output testing, operating temperature calibration, and fault code troubleshooting

Key Features Summary:

• Temperature Probe on Outlet Connector
• Easy Filter Replacement:
• Designed for quick maintenance.
• Filter Panel on Back Panel:
• Prevents dust collection.
• Enhances filter life and improves performance.
• Easy Button Operation:
• Features a "click key" system for easy usage.
• Operates with pre-set temperature settings.
• Collapsible Hose Pipe:

Key Features Summary:

• Temperature Probe on Outlet Connector
• Easy Filter Replacement:
• Designed for quick maintenance.
• Filter Panel on Back Panel:
• Prevents dust collection.
• Enhances filter life and improves performance.
• Easy Button Operation:
• Features a "click key" system for easy usage.
• Operates with pre-set temperature settings.
• Collapsible Hose Pipe:

I.O.B. Forced_Air Warming Unit, USA

Operating Temperature :

High : 43 degree
Med  : 38 degree
Low  : 32 degree

Device Rating :
110-120 VAC. 60 Hz, 10 A
220-240 VAC, 50 Hz,   8 A

Relative Noise Level : 55 dBA

Filter : 0.2 µm High-efficiency Filter, 500-1000 hours

Standards : IEC 60661-1,IEC 60601-1-2, IEC 60601-1-8, IEC 80601-1-35

Dimensions : H28cm x D22cm x W22cm

Weight : 4.5Ks

Key Features Summary:

• Temperature Probe on Outlet Connector
• Easy Filter Replacement:
• Designed for quick maintenance.
• Filter Panel on Back Panel:
• Prevents dust collection.
• Enhances filter life and improves performance.
• Easy Button Operation:
• Features a "click key" system for easy usage.
• Operates with pre-set temperature settings.
• Collapsible Hose Pipe: